 | Prewired Jazz Bass Control Plate Assemblies
• Prewired Fender Vintage Style Jazz Bass Control Plate Assemblies
Completely pre-wired Fender Jazz Bass Controls including your choice of chrome, black, or gold Control Plate with screws, which has been drilled out to accept three CTS 250K audio taper solid shaft pots, one .047µF Orange Drop Tone Capacitor, one Switchcraft 1/4" Mono Output Jack, Vintage Cloth Covered 22awg Stranded Copper Wire, three black bakelite Jazz Bass Knobs with set screws, and more . . .
• Prewired Modern Fender Style Jazz Bass Control Plate Assemblies
Completely pre-wired controls includes fasteners and your choice of finish for the control plate and dome knobs. The assembly uses three CTS 250K audio taper solid shaft pots, one .047µF Orange Drop Tone Capacitor, one Switchcraft 1/4" Mono Output Jack, and the finest wire on the market: WBE PTFE 22awg Teflon High Temp Silver Plated Wire, etcetera.
• Prewired Economy Fender Style Jazz Bass Control Plate Assemblies
These assemblies are the same choices as those above. The only differences are the exclusion of copper foil and the grade of wire used. These assemblies use WBE 22awg PVC Jacketed Stranded Copper Wire.
• Prewired Aftermarket Jazz Bass Control Plate Assemblies
Includes chrome pointed jazz control plate, 3 screws, 3 chrome dome-top knobs, 250K dime-size (16mm) pots, .047µF capacitor, output jack, and 24awg PVC Jacketed Stranded Copper Wire. These do not fit Fender bass guitars but do work with SX and similar bass guitars.
|
Chrome
Chrome
Black
Black
Diagram |
Fender '51 Precision Bass OR Telecaster Bass Control Plate Assembly - USA Upgrade -
Pre-wired controls include drilled out Control Plate with screws, two CTS 250K audio taper solid shaft pots, two matching Knobs with set screws, one .047µF Orange Drop Capacitor, one Switchcraft 1/4" Mono Output Jack
Also included is one 8"x 12" copper foil sheet, which is enough for shielding your cavities and backside of your pickguard.
Note: The photo shows unsoldered wires to the output jack and this is just in case you're using the long panel jack with the large head.
So, IF you do NOT want the Switchcraft mono jack soldered, be sure to tell me, otherwise the assembly with come to you with the Switchcraft Mono Jack soldered.
If you need a body-mount Jack Plate, click here and Add To Cart.
Choices besides chrome, black, or gold control plate:
- WBE 22awg PVC Covered Stranded Copper Wire
- Vintage Cloth Covered 22awg Stranded Copper Wire
- WBE PTFE 22awg Teflon High Temp Silver Plated Wire
Chrome: WBE 22awg PVC : $54.95 
Chrome: Vintage Cloth 22awg : $59.95
Chrome: WBE PTFE 22awg Teflon : $64.95
Black: WBE 22awg PVC : $54.95
Black: Vintage Cloth 22awg : $59.95
Black: WBE PTFE 22awg Teflon : $64.95
Gold: WBE 22awg PVC : $54.95
Gold: Vintage Cloth 22awg : $59.95
Gold: WBE PTFE 22awg Teflon : $64.95
|
|
If you've arrived here through an old link, I've moved the harnesses to another page to make room for more Control Plate Assemblies. Here they are . . .
|
Also see: Bass PreAmps & Prewired Assemblies and Prewired Pickguards with Pickups
|
|
){kind=small}
){kind=small}
){kind=small}
){kind=small}
){kind=small}
){kind=small}
