Artec BE2
EQ Circuit
Dimensions
|
Artec BE2 Onboard Bass Guitar PreAmp
Specifically developed for the bass guitar, the BE2 has the Bass, Treble, Balance & Volume potentiometers mounted right on the circuit board. The entire unit was manufactured utilizing Surface Mount Technology (SMT) which allows for its compact size, exceptional sound quality and absolutely no noise~!
The central battery mount maximizes the use of compartment space. Its high impedence input design works with both active and passive pickups. The low impedence output maintains your tone without any frequency loss. Each band has up to 12 dB of cut and boost. The only soldering is for connecting the pickups, ground and output jack.
Easy drop-in installation with minimal soldering~! Connect two wires from two pickups into the PCB and then three wires to the Output Jack. The last step is to connect the Ground wire.
Technical Specifications:
• Bass : +/-12 dB at 100 Hz
• Treble : +/-12 dB at 4 kHz
• Current : 0.16 mA
• Voltage range : 6 V ~ 22 V
• Battery : 9 V Alkaline (not included)
ARTEC guarantees a virtually noiseless sound with long 9 volt battery life. (More than 4000 hours in continuous use. - workable voltage : drop down to 6 V). All active EQ circuits include a 9V battery clip, 1/4 stereo jack, 2 foot piece of 22 awq. stranded wire and a wiring diagram.
BE2 Price: $26.95 
|
)
)
