Prewired Passive Fender Jazz Bass Control Harnesses • Fender '62 Jazz Bass Control Harnesses Upgraded prewired harnesses for Fender or similar bass guitars with two concentric Fender CTS volume controls and tone controls with two Orange Drop caps, and one Switchcraft output jack. 3 Choices for Wire are vintage cloth covered, modern PVC or Teflon jacketed wire. • Standard Fender Jazz Bass Control Harnesses Choices: Short Solid Shaft, Short Split Shaft, or Long Split Shaft Pots Upgraded prewired harnesses for Fender or similar bass guitars with two CTS volume controls, one CTS tone control with Orange Drop cap, and one Switchcraft output jack. 3 Choices for Wire are vintage cloth covered, modern PVC or Teflon jacketed wire. • Left Hand Jazz Bass Control Harnesses - only available with CTS Short Split Shaft Pots. Upgraded prewired harnesses for Fender or similar bass guitars with two CTS volume controls, one CTS tone control with Orange Drop cap, and one Switchcraft output jack. Choices for wire are vintage cloth covered, modern PVC or Teflon jacketed wire. • Jazz Bass Control Harness with Mini-Pots and Knobs This passive harness was desoldered from a new SX bass guitar and new pickup wiring soldered onto the dime-size split shaft pots. Tested before removal. Functions fine.

Prewired Passive Fender PJ Bass Control Harnesses • PJ Bass Control Harnesses Upgraded prewired harnesses for Fender or similar bass guitars with two CTS volume controls, one CTS tone control with Orange Drop cap, one Switchcraft output jack and plate. Choices include vintage cloth or modern style wire, copper foil shielding, etcetera . . .

Prewired Passive Fender P Bass Control Harnesses • Fender P Bass Control Harnesses Upgraded prewired harnesses for Fender or similar bass guitars with one CTS volume control, one CTS tone control with Orange Drop cap, and one Switchcraft output jack. Choices include vintage cloth or modern style wire, copper foil shielding, etcetera . . . • Fender P, PJ, and Jazz Bass Guitar Control Harnesses with 16mm Mini Pots Replacement wiring harness for any bass requiring small diameter pots and small diameter output jack due to the limited size of the control cavity. Includes Alpha 250K audio taper split shaft pots, Xicon polyester film .047µF capacitor, 1/4" mono output jack, 22 guage PVC wire, 1/2 sheet (4" x 12") of copper foil shielding for pickguard and ground wire, and shrink wrap tubing.

Prewired Passive Music Man Bass Control Harnesses • Music Man Bass Control Harnesses with 24mm Alpha Pots Prewired harnesses for Music Man style bass guitars with two 24mm Alpha volume controls, one 24mm Alpha tone control with Orange Drop cap, and one Switchcraft output jack. Choices include vintage cloth or modern style wire, copper foil shielding, etc.

---