>>> Electronics >> Wiring Components > Soldering & Desoldering Tools & Supplies
||Hakko 936 ESD-Safe 110V Soldering Station|
Includes 60 watt station with 390 - 900 degree F adjusTable temperature, soldering iron with T-900 standard tip, and base stand. This soldering station is state-of-the-art. Temperature is maintained within a few degrees at all times, allowing faster soldering. Hakko sells a wide variety of soldering tips for $7 (or less) each. The ceramic heating element and temperature sensor system are used on some very high-end production grade soldering stations.
Compare at $129.99 as typically sold at Amazon.com
|Weller WLC100 Variable Temp Solder Station|
• UL approved variable power control (5~40W)
• Temperature range: 900°
• 40W pencil iron and ST3 interchangeable tip
• Replaceable HE40 Heating Element
• Cushioned foam grip
• Safety guard iron holder
• On/off switch with "power-on" indicator light
• Tip Cleaning Pad ~ Natural Sponge
• Uses Weller ST series tips
Replacement Parts ~ Okay . . . here's the scoop . . . look at the price of the Solder Iron versus the price of the heater element. Don't bother changing the element when you can get a new iron with a tip~! And if you don't need the variable control unit, it's a no-brainer . . . buy just the Solder Iron.
|Professional Soldering Iron - 25 watts, UL approved|
High performance, long lasting tip, 3-wire grounded AC cord for safety. Rubber sleeve for comforTable grip. Screw-in replaceable tip. A low cost quality iron for the professional which will stand up to repeated use, and give great results every time. Compare to soldering irons costing $30 or more.
Replacement Tip for the PSI - Includes hex key wrench to fit the set screw in the soldering iron to facilitate changing the tip.
||Professional Soldering Iron Stand|
Professional soldering stand - holds hot soldering iron, prevents burns to equipment, workbenches and personnel. Large, durable. Rugged all-metal construction, with sponge for tip cleaning.
||Kester Solder Spools - 60/40 Lead/Tin Rosin Core|
Designed for electrical/electronic work, flux residue is non-corrosive and non-conductive. Can be used on wiring in stereos, motors, appliances and auto batteries. Rosin flux is contained in the wire core; no external flux is needed. Contains lead – can not be used on drinking water lines.
|Kester Kwik Draw 60/40 Solder Dispenser|
Kester 44 solder wire is a high activity RA core flux designed for excellent instant wetting action, even on Nickel surfaces. Although "44" is an RA-based material, the residues are non-corrosive if left uncleaned.
Flux Type: Rosin Activated (RA). Solder Gauge: 18awg. Solder Alloy: 60/40 Sn/Pb.
.031" Pocket Pack Solder is the perfect tool box supply size. Solder feeds conveniently from the end of the handy dispenser tube. Contains 0.5 oz. 60% tin/40% lead 0.031" diameter rosin core solder. Approximately 15 ft. in legth. Larger diameters will have less in length but this is sold by weight.
||3S-Wick Desoldering Braid|
Braided rosin-filled copper braid for removing solder and cleaning up PC boards. Just place the braid against the solder point and heat with the iron. Draws solder away from the board and into the braid. Clip off the used end and pull fresh braid from the roll. 5 foot of braid is on the roll, good for dozens of desoldering and clean-up projects. 3-S Braid is made in Switzerland and meets Mil Spec, NASA, and DIN requirements.