Allen Head Chrome
|
Fender Bullet Style Truss Rod Adjusting Nuts - 10-32 thread
The 'bullet' allen nut was introduced by Fender for truss rod adjustment at the headstock. Chrome-plated steel. 10-32 thread, as used by Fender after 1971. 1" long x 11/32" diameter. 1/8" allen wrench required for adjustment.
Allen Head - 10-32 Thread Chrome: $4.95 each 
|
Slot Head Nickel
|
Fender Style Truss Rod Adjusting Nuts
For vintage and vintage reissue Fender-style necks
X Slot Head - 8-32 Thread: 7/8" long x 3/8" diameter.
Used by Fender from 1957 to around 1969-70, and again in 1982 on vintage reissues.
Nickel: $3.95 each
X Slot Head - 10-32 Thread: 7/8" long x 3/8" diameter.
Used by Fender from 1959-60 to late 1971.
Nickel: $3.95 each
|
Hex Head Brass
|
Gibson Style Truss Rod Adjusting Nuts - 10-32 thread
Fits vintage and modern basses.
Hex Head - 10-32 Thread Brass: $2.95 each
|
Black Oxide
|
Spoke Wheel Truss Rod Nut - 10-32 thread
The 1/2"diameter "spoke" nut is designed to protrude slightly from the neck heel. Insert a thin tool into the side of the nut to turn it and can be adjusted without removing the pickguard. Spoke wheel truss rod nuts have a 10-32 thread, are 1-1/8" long.
Spoke Head - 10-32 Thread Black Oxide: $6.95 each
|
Steel
|
Truss Rod Nut Anchor Nut - 10-32 thread
For single action vintage truss rods. 5/8" long x 3/8" diameter.
10-32 Thread Steel: $2.95 each
|
Photo shows screws larger than they actually are. |
Truss Rod Cover Screws - #2 x 3/8" Phillips Head
These are the same as Tuning Machine screws so don't be alarmed when you see this on your parts list. If you've bought a cover from me you would have received 2 or 3 screws with the cover for free. These screws are sold in packages of 20.
Nickel: $3.95
Black: $4.95
Gold: $5.95
|
>>> Bass Parts >> Screws, Etc. > Truss Rod Nuts & Truss Rod Cover Screws
|
|
)
)
)
)
)
