Cavities: Routed pickup cavities to Fender specs. Somehow the factory that made this body sent it out with undersize pickup cavities. I've never seen a cavity this small. I had to force the pickups out~! I'm doubting this is a Fender body.
Here's a photo of the bridge pickup template showing how small the opening is.
Neck Access: Drilled body to make truss rod access hole: 1/2"W x 1/2"D x 3/4"L
Body Finish: Black. Applied Dr. Duck's Axwax
Pickguard: Black-White-Black - Shielded rear with Copper Foil.
Finger/Thumb Rests: No
Bridge: Leo Quan Badass II - Removed to clean and polish with Dr. Duck's Axwax and to install new ground wire with copper foil attached. I attach the copper foil to provide a better contact with the bridge as sometimes I've found the wire itself inadequate, especially if it has fallen into the ground wire hole.
Bridge/Pickup Covers: No
Strap Buttons/Locks: Already had Strap Locks installed.
|
Project Parts and Labor Checklist
 Fender Jazz Body
 • Finish: Black
• Bridge: Badass II
• Bridge Cover: No
• Pickup Cover: No
• Pickguard: Blk-Wht-Blk
• PG Screws: Nickel
• Finger Rest: No
• Thumb Rest: No
• Strap Buttons: No
• Strap Locks: Chrome
|
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}